Reactor Design in Japan Has Long Been Questioned

By TOM ZELLER Jr.
NYT

The warnings were stark and issued repeatedly as far back as 1972: If the cooling systems ever failed at a Mark 1 nuclear reactor, the primary containment vessel surrounding the reactor would probably burst as the fuel rods inside overheated. Dangerous radiation would spew into the environment.

Now, with one Mark 1 containment vessel damaged at the embattled Fukushima Daiichi nuclear plant and other vessels there under severe strain, the weaknesses of the design — developed in the 1960s by General Electric — could be contributing to the unfolding catastrophe.

When the ability to cool a reactor is compromised, the containment vessel is the last line of defense. Typically made of steel and concrete, it is designed to prevent — for a time — melting fuel rods from spewing radiation into the environment if cooling efforts completely fail.

In some reactors, known as pressurized water reactors, the system is sealed inside a thick, steel-and-cement tomb. Most nuclear reactors around the world are of this type.

(More here.)

You have read this article with the title Reactor Design in Japan Has Long Been Questioned. You can bookmark this page URL https://ogbcommunity.blogspot.com/2011/03/reactor-design-in-japan-has-long-been.html. Thanks!